Table of Contents
Advertisement
SIARETRON 1000 – 1100 - 3000
Service Manual
4.3
PANEL BOARD
1)
Connect the power supply (POWER board) to JP1 PANEL connector by the dedicate cable (as
indicated in the following drawing):
from F020_05
Connect the ATS.098 board to power supply (as indicated in the figure), verify that the switches of S1 are in
OFF position, connect the secondary of transformer to CN7 POWER connector, supply the main of transformer
and press the switch named "ON/OFF" on ATS.098 board for powering the device.
from F020_05
Verify that after some seconds, the scrolling script " PAnnELLo Lu200 rEL. 4.00 " appears on the MINUTE
VOLUME display.
SIARETRON_SE3_en
25 / (72 )
( rev.3) 30.06.2004
Advertisement
Table of Contents
