Table of Contents
Advertisement
SIARETRON 1000 – 1100 - 3000
Service Manual
1
USE OF SERVICE MANUAL
1.1
Manual users
This manual is addressed to SIARE qualified personnel or to technical qualified personnel formerly authorized
by SIARE.
The SIARE authorized technician has the instruments and suitable spare parts and he is instructed to operate
respecting product safety.
SIARE declines any responsibility arising from technical interventions effected on the equipment without its
formal authorization.
The correct and safe use of the equipment both for patient an operator requires the knowledge of
recommendations and instructions contained in the present manual and in the User's Manual.
1.2
Consulting notes
!
The mark
reported next to and instruction individuates an important remark for the safety both of patient
and operator.
The manual describes the equipment and the operating principle with the aid of electric and pneumatic
drawings.
The User's Manual is part of this manual, the technician must have a copy of User's Manual and must know its
content before effecting the operations described in the present manual.
1.3
SAFETY NOTES
WARNINGS !!
The equipment has been manufactured under the warranty and quality conditions of the product and its
components in order to assure the maximum reliability of the equipment and safety for the patient and operator.
Therefore, the safety is guaranteed only in case the technical interventions are effected in conformity to this
manual indications and those contained in the user's manual which is unseparable par of the product
documentation currently used by the service.
Always in order to grant safety it is necessary to respect the maintenance schedule foreseen in the user's
manual.
The maintenance and replacement of any part must be effected by personnel formerly authorized by SIARE
using the original SIARE spare parts or checked by the same.
SIARE is not civically or criminally liable in the following cases:
1)
Use in conditions and for reasons not stated or prescribed in service and user's manuals.
2)
Lack or omission of scheduled maintenance as described in service and user's manuals.
3)
Maintenance performed by personnel not formerly authorized by SIARE.
4)
Use of non original SIARE spare parts or not checked by the same.
5)
Connection with equipment that is not in compliance with Safety Norms in effect for intended use.
SIARETRON_SE3_en
3 / (72 )
( rev.3) 30.06.2004
Advertisement
Table of Contents
