Bypass Lift Clutch (Cl3) - Ricoh SAVIN D0AP Service Manual

4.17.3 BYPASS LIFT CLUTCH (CL3)

1.
Remove the right cover.
2.
Remove the front cover.
3.
remove the bypass lift clutch (CL3) [A].
When attaching the bypass lift clutch (CL3), make sure that the connector of the clutch is
set over the holder as shown below.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
(Right Cover
(Printer),
(Front Cover (Printer),
4-126
Right Cover (MF))
Front Cover (MF))
Drive Units
SM