6.
Remove the drum motor (M3) [A].
4.17.9 FEED/FUSING MOTOR (M4)
1.
MF model: Remove the SCB with the bracket.
Model))
Printer model: Remove the BCU with the bracket.
Model))
2.
Printer model: Remove the harness guide [A].
3.
Remove the duplex clutch (CL1).
4.
Remove the Rear interlock switch (SW2) [A] with the bracket.
SM
(SCB with the Controller Box (MF
(BCU with the Bracket (Printer
(Duplex Clutch
(CL1))
4-133
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Drive Units