You will need the original SD card in case the HDD unit ever fails.
•
9.
Attach the SD card slot cover and fasten it.
10. Turn on the machine.
11. Press [File Format / File Name] on the scanner function screen.
12. Check that [OCR setting] is displayed on the "File format / File Name" screen.
The searchable PDF function can be switched on/off on the [OCR Settings] screen
•
after installing the OCR unit.
If you want to use the searchable PDF function, select [On] for [OCR Settings].
•
(Default: [Off])
2.24.4 RECOVERY PROCEDURE
When the OCR option is installed, the OCR function is saved on the HDD, and ID information
on the SD card is saved in the NVRAM. Therefore, when replacing the HDD or NVRAM, this
option must be reinstalled.
When storing the original SD card
When only the HDD is replaced
•
Reinstall using the original SD card.
•
When only the NVRAM is replaced
When performing upload/download of NVRAM data, reinstall using the original SD card.
When not performing upload/download of NVRAM data, order and reinstall a new SD card
(service part).
When the HDD and NVRAM are replaced simultaneously
•
Reinstall using the original SD card.
If the original SD card is lost
Order and reinstall a new SD card (service part).
SM
OCR Unit Type M13 (D3AC-23, -24, -25)
2-115
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1