4.3.4 LOCATIONS TO APPLY GREASE IN THE SCANNER UNIT
Inside Scanner Unit
Apply grease (FLOIL G-348) at the locations shown below.
Location
Part name
[A] Scanner
GUIDE ROD:
guide rod
SCANNER
[B] Scanner
RAIL:
rail
SCANNER
SM
5 places.
Hold the scanner carriage with the hand, and then move it
right and left three times from the end to the end of the guide
rod to spread the grease to the whole.
5 places.
Spread the grease on the entire rail (range of [C]) with a
brush.
4-21
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Special Tools and Lubricants
Note