Ricoh SAVIN D0AP Service Manual page 424

5.9 NVRAM DATA UPLOAD/DOWNLOAD
5.9.1 UPLOADING CONTENT OF NVRAM TO AN SD CARD
Do the following procedure to upload SP code settings from NVRAM to an SD card.
This data should always be uploaded to an SD card before the NVRAM is replaced.
•
Make sure that the write protection of an SD card is unlocked
•
1.
Do SP5-990-001 (SMC Print) before turning OFF the power. You will need a record of the
NVRAM settings if the upload fails.
2.
Turn the power off.
3.
Remove the SD card slot cover [A].
4.
Insert the SD card into SD slot 2 [A] (lower).
5.
Turn the power on.
6.
Execute SP5-824-001 (NVRAM Data Upload) and then press the "Execute" key.
7.
The following files are copied to an NVRAM folder on the SD card when the upload
procedure is finished.
The file is saved to the path and the following filename:
NVRAM\<serial number>.NV
Here is an example with Serial Number "K5000017114":
NVRAM\K5000017114.NV
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
NVRAM Data Upload/Download
5-50 SM