2. INSTALLATION
2.1 INSTALLATION REQUIREMENTS
2.1.1 ENVIRONMENT
30. Temperature Range: 10 °C to 32 °C (50 °F to 89.6 °F)
31. Humidity Range: 15% to 80% RH
32. Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight.)
33. Ventilation: Room air should turn over at least 3 times/hr/person
34. Avoid an area which is exposed to sudden temperature changes. This includes:
Areas directly exposed to cool air from an air conditioner.
•
•
Areas directly exposed to heat from a heater.
35. Do not place the machine in an area where it will be exposed to corrosive gases.
36. Do not install the machine at any location over 2,000 m (6,500 ft.) above sea level.
37. Place the copier on a strong and level base. (Inclination on any side should be no more
than 3 mm.)
38. Do not place the machine where it may be subjected to strong vibrations.
SM
2-1
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Installation Requirements