Table of Contents
Advertisement
F A N C O N T R O L
The Fuze Wash Z350 is a high-performance fixture suited for multiple applications. For noise
critical environments such as Theater, Opera, or Orchestral Halls, it offers various fan opera-
tion modes which remove unwanted noise distractions for the audience and performers. Fan
Modes can be changed remotely via the DMX control channel, allowing the fixture to offer
high output or whisper-silent operation at a moment's notice. All Fan Modes smoothly transi-
tion over a brief period, preventing unwanted attraction to the fixture.
Auto (Default) – Fans only run at the speeds needed to keep the LED engine within a safe
temperature range, and ensures optimal performance of the fixture. They will turn off if pos-
sible; for example, when the fixture is dimmed to a low intensity. Fans sense the ambient and
fixture temperature and will, at all times, try to keep noise levels at a minimum. The fixture
output will only be reduced when the LED engine cannot be cooled to its safe operating range
due to a high ambient temperature.
NOTE: This mode is recommended for daily operation.
High – Fan speeds are increased throughout the fixture for the most efficient cooling. This
mode will increase wear on the fans and should only be utilized in exceptional circumstances.
Fans will always run, even if the fixture is dimmed. Fixture output is kept at 100% unless the
LED engine temperature reaches an unsafe temperature, at which point the fixture will re-
duce power carefully to ensure continued safe operation. This mode is only required in very
high ambient temperatures when automatic fan speed adjustments are not desired.
Low – Fan speeds are reduced throughout the fixture for a lower noise profile. The fixture
output is also reduced to approximately 80%. This mode should be sufficient for most uses
where lower noise is required.
23
Advertisement
Table of Contents
