Table of Contents
Advertisement
TVL2000
1 Display: Shows the various menus and the selected functions
2 Indicator LED:
DMX
On
MASTER
On
SLAVE
On
COLOR TEMP.
On
3 Button:
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
4 Color Temperature Adjustment: Adjust the color temperature from 3200k to 6500k, 25K
as a step. When the value is between 4825K and 4875K the green
LED indicator will light . It means the power consumption of
CW/WW color
5 Dimmer Adjust knob: Adjust the intensity of the unit.
6 DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
7 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal
8 Mains output: Connect to supply main power for the next unit.
©Elation Pr
fessionals® - www.elationlighting.com - TVL2000 Instruction Manual Page 8
o
Control Panel
DMX input present
Master Mode
Slave Mode
Max. power consumption of CW/WW
has reached
the maximum.
TVL2000
Universal DMX Control:
universal DMX-512 controller to create unique programs tailored to
your individual needs.
1. The TVL2000 has three DMX channel modes. To set the chan-
nel mode see page 10. See page 14 for the DMX modes & traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 10 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Manual Mode:
This mode allows the user to adjust the color intensity
to create their own desired color temperature.
1. Press the MENU button until
ENTER.
2.
Follow the instructions on pages 10-11 to operate this mode.
3. You can also use the Color Adjust Knob and Dimmer Knob to
manually create your desired color temperature. Please see the
Control Panel on page 8.
TVL2000
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 4 fixtures maximum. After 4 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
©Elation Pr
fessionals® - www.elationlighting.com - TVL2000 Instruction Manual Page 13
o
Universal DMX Control
This function allows you to use a Elation
"MANU" is displayed, and press
Power Cord Daisy Chain
®
Advertisement
Table of Contents
