Elation FUZ035 User Manual page 21

S Y S T E M M E N U
Function - Status - Remote Add
When enabled, an external controller can be used to define the DMX address of the fixture.
1. Connect the fixture to the external controller and power both devices on.
2. Set the DMX value of Channel 1 on the controller to (7).
3. Set the DMX value of Channel 2 on the controller to (7) or (8), depending on the desired
DMX address.
• When set to (7), the DMX address can be set between (1) and (255).
• When set to (8), the DMX address can be set between (256) and (511).
4. Using Channel 3 on the controller, set the desired DMX address of the fixture.
• Example 1: If the desired DMX address is 57, set Channel 1 to a value of (7), set Channel
2 to a value of (7), and then set Channel 3 to a value of (57).
• Example 2: If the desired DMX address is 420, set Channel 1 to a value of (7), set Chan-
nel 2 to a value of (8), and then set Channel 3 to a value of (164). (256+164=420)
5. After setting Channel 3 to the desired DMX address value, wait for approximately 20 sec-
onds for the fixture to complete the address reset function.
Function - Dim Mode
Select desired DIMMER MODE (Standard, Stage, TV, Architectural, Theatre).
21
!