Advertisement

Quick Links

FUZE PENDANT™
user manual

Advertisement

Table of Contents
loading

Summary of Contents for Elation FUZE PENDANT

  • Page 1 FUZE PENDANT™ user manual...
  • Page 2 +31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu Elation Professional Mexico | AV Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000 +52 (728) 282-7070 D O C U M E N T V E R S I O N Due to additional product enhancements, an updated version of this document may be available online.
  • Page 3: Table Of Contents

    C O N T E N T S General Information Warranty Returns (USA Only) Safety Guidelines Maintenance Guidelines Overview Optional Accessory Installation Guidelines Fixture Installation Guidelines E-FLY Wireless Set Up Guidelines System Menu Dimmer Modes DMX Channel Functions Color Temperature Table Virtual Gel Swatch Book Table Error Codes Specifications...
  • Page 4: General Information

    45° Lens Pendant Bracket Kit Locking IP65 Power Cable CUSTOMER SUPPORT Contact ELATION Service for any product related service and support needs. Also visit forums.elationlighting.com with questions, comments or suggestions. ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST 323-582-3322 | Fax 323-832-9142 | support@elationlighting.com...
  • Page 5: Warranty Returns (Usa Only)

    To obtain warranty service, a Return Materials Authorization (RMA) number must first be obtained from ELATION. It is the Customer’s responsibility to provide product proof of purchase and serial number by acceptable evidence such as an invoice copy or an approved ELATION Extended Warranty Certificate (“EWC”) and any relevant maintenance records at the time warranty service is sought.
  • Page 6: Safety Guidelines

    This fixture is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. Elation Professional is not responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual.
  • Page 7 S A F E T Y G U I D E L I N E S DO NOT TOUCH the fixture housing during operation. DO NOT shake fixture, and avoid brute force when installing and/or operating fixture. DO NOT operate fixture if the power cord is frayed, crimped, damaged and/or if any of the power cord connectors are damaged or do not fit into the fixture securely with ease.
  • Page 8: Maintenance Guidelines

    Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from an authorized Elation dealer.
  • Page 9: Overview

    O V E R V I E W 5. Wired DMX Cable Gland 1. Locking Power Connector 6. Power Input Switch 2. DMX Input – 5-pin XLR Male 3. DMX Output – 5-pin XLR Female 7. Emergency Power Input Terminal 4.
  • Page 10 O V E R V I E W POWER CONNECTIONS Power may be provided to the fixture by means of an industry standard locking power connector (1). Alternately, for more permanent installations, a power line may be wired to the fixture by connecting a line to the wired power input cable gland (4).
  • Page 11: Optional Accessory Installation Guidelines

    O P T I O N A L A C C E S S O R Y I N S TA L L AT I O N G U I D E L I N E S LENS KIT PLACE FIXTURE ON A STABLE SURFACE AND LET COOL FOR 15 MINUTES! DO NOT OVER TIGHTEN SCREWS! DO NOT USE A POWER SCREWDRIVER! 1.
  • Page 12 O P T I O N A L A C C E S S O R Y I N S TA L L AT I O N G U I D E L I N E S YOKE BRACKET KIT PLACE FIXTURE ON A STABLE SURFACE AND LET COOL FOR 15 MINUTES! DO NOT OVER TIGHTEN SCREWS! DO NOT USE A POWER SCREWDRIVER! 1.
  • Page 13 O P T I O N A L A C C E S S O R Y I N S TA L L AT I O N G U I D E L I N E S HALF AND FULL SNOOT KIT PLACE FIXTURE ON A STABLE SURFACE AND LET COOL FOR 15 MINUTES! DO NOT OVER TIGHTEN SCREWS! DO NOT USE A POWER SCREWDRIVER! 1.
  • Page 14: Fixture Installation Guidelines

    F I X T U R E I N S T A L L A T I O N G U I D E L I N E S FLAMMABLE MATERIAL WARNING Keep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations.
  • Page 15 F I X T U R E I N S T A L L A T I O N G U I D E L I N E S RIGGING Overhead rigging requires extensive experience, including calculating working load limits, knowledge of installation material being used, and periodic safety inspection of all installation material and the fixture, among other things.
  • Page 16: E-Fly Wireless Set Up Guidelines

    E - F L Y W I R E L E S S S E T U P G U I D E L I N E S There are many factors that affect and/or interrupt a wireless signal such as walls, glass, metal, objects, and people.
  • Page 17: System Menu

    S Y S T E M M E N U The fixture includes an easy to navigate system menu. The OLED control panel display located at the top of the fixture (see image below), provides access to the main system menu where all necessary system adjustments are made to the fixture.
  • Page 18 S Y S T E M M E N U ELATION FUZE PENDANT™ - SYSTEM MENU Supports Software Versions: ≥ 1.2 DMX Address A001 ~ AXXX Dimmer1CH, Dimmer Color 4CH, RGBWL 5CH, DMX Channel Mode RGBWL 16bit 10CH, Standard 10CH, Extended...
  • Page 19 000-255 Green 000-255 Blue 000-255 Manual White 000-255 Control Lime 000-255 Dimmer 000-255 Dimmer Fine 000-255 Strobe 000-255 FixtureLifeTime Power On Time xxxxxx Hours PowrOnTimAbleRes xxxxxx Hours FixLastRunTime PowerOnTimeReset Passcode 038 Total Lamp Hours xxxxxx Hours Current xxxF / xxxC Max Resettable xxxF / xxxC Fixture Temp...
  • Page 20 S Y S T E M M E N U – D M X S E T T I N G S DMX ADDRESS This function allows the user to define the DMX address of the fixture. This value is displayed as “AXXX”...
  • Page 21 S Y S T E M M E N U – S T A N D A L O N E The Standalone System Menu allows the user to define how the fixture will behave when operating without DMX control. Color settings located in this menu also define the fixture output when operating in 1-Channel DMX Mode.
  • Page 22: Dimmer Modes

    D I M M E R M O D E S DIMMER 100% Time (ms) 0 Sec Rise Time Down Time 0 sec Fade Time 1 sec Fade Time Dimming Curve Ramp Effect Rise Time (ms) Down Time (ms) Rise Time (ms) Down Time (ms) Standard (default) Stage...
  • Page 23: Dmx Channel Functions

    D M X C H A N N E L F U N C T I O N S ELATION FUZE PENDANT™ RGBWL MODES - DMX Channel Values / Functions (17 Total DMX Channels) Supports Software Versions: ≥ 1.2 Features subject to change without notice.
  • Page 24 10CH 10CH 17CH Dimmer RGBWL Value Function Default Snap Dimmer RGBWL Standard Extended Color 16bit 0 - 255 0 → 100% Red Fine 0 - 255 0 → 100% Green 0 - 255 0 → 100% Green Fine 0 - 255 0 →...
  • Page 25 10CH 10CH 17CH Dimmer RGBWL Value Function Default Snap Dimmer RGBWL Standard Extended Color 16bit Dim Modes 0 - 20 Standard 21 - 40 Stage 41 - 60 61- 80 Architectural 81- 100 Theatre 101- 120 Stage 2 Dimmer Delay Time 0.1s 0.2s 0.3s...
  • Page 26 10CH 10CH 17CH Dimmer RGBWL Value Function Default Snap Dimmer RGBWL Standard Extended Color 16bit Control 0-19 20-29 30-39 40-59 60-69 70-79 80-84 Reset 85-87 88-90 91-93 94-96 97-99 Change Refresh Rate (Hz) (Hold 1s) 1000 1010 1020 1030 1040 1050 1060 1070...
  • Page 27 10CH 10CH 17CH Dimmer RGBWL Value Function Default Snap Dimmer RGBWL Standard Extended Color 16bit 1160 1170 1180 1190 1200 1210 1220 1230 1240 1250 1260 1270 1280 1290 1300 1310 1320 1330 1340 1350 1360 1370 1380 1390 1400 1410 1420 1430...
  • Page 28 10CH 10CH 17CH Dimmer RGBWL Value Function Default Snap Dimmer RGBWL Standard Extended Color 16bit 169-200 Idle 201-210 Dimmer Curve Linear (default) 211-220 Dimmer Curve Square 221-230 Dimmer Curve Inverse Square 231-240 Dimmer Curve S-Curve Internal program 1 (Scene 1-8) Internal program 2 (Scene 9-16) Internal program 3 (Scene 17-24) Internal program 4 (Scene 25-32)
  • Page 29 ELATION FUZE PENDANT™ HSI MODES - DMX Channel Values / Functions (9 Total DMX Channels) Supports Software Versions: ≥ 1.2 Features subject to change without notice. HSI Extended Value Function Default Snap Strobe 0 - 31 Closed 32 - 63...
  • Page 30 HSI Extended Value Function Default Snap Dim Modes 0 - 20 Standard 21 - 40 Stage 41 - 60 61- 80 Architectural 81- 100 Theatre 101- 120 Stage 2 Dimmer Delay Time 0.1s 0.2s 0.3s 0.4s 0.5s 0.6s 0.7s 0.8s 0.9s 1.0s 1.5s...
  • Page 31 Value Function Default Snap Extended Control 0-19 Idle 20-29 30-39 40-59 60-69 70-79 80-84 Reset 85-87 88-90 91-93 94-96 97-99 Change Refresh Rate (Hz) (Hold 1s) 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130 1140 1150...
  • Page 32 Value Function Default Snap Extended 1160 1170 1180 1190 1200 1210 1220 1230 1240 1250 1260 1270 1280 1290 1300 1310 1320 1330 1340 1350 1360 1370 1380 1390 1400 1410 1420 1430 1440 1450 1460 1470 1480 1490 1500 2500 4000 5000...
  • Page 33 Value Function Default Snap Extended 169-200 Idle 201-210 Dimmer Curve Linear (default) 211-220 Dimmer Curve Square 221-230 Dimmer Curve Inverse Square 231-240 Dimmer Curve S-Curve Internal program 1 (Scene 1-8) Internal program 2 (Scene 9-16) Internal program 3 (Scene 17-24) Internal program 4 (Scene 25-32) Internal program 5 (Scene 33-40) Internal program 6 (Scene 41-48)
  • Page 34: Color Temperature Table

    COLOR TEMPERATURE VALUE COLOR TEMP (K) VALUE COLOR TEMP (K) 2400 5500 2500 5600 2600 5700 2700 5800 2800 5900 2900 6000 3000 6100 3100 6200 3200 6300 3300 6400 3400 6500 3500 6600 3600 6700 3700 6800 3800 6900 3900 7000 4000...
  • Page 35: Virtual Gel Swatch Book Table

    VIRTUAL GEL SWATCH BOOK VALUE FILTER# COLOR VALUE COLOR FILTER# Pale Yellow Mauve Straw Medium Purple Gold Tint Lavender Spring Yellow Palace Blue Medium Yellow Dark Blue Yellow Medium Blue Deep Amber Deep Blue Deep Straw Daylight Blue Loving Amber Slate Blue Gold Amber Light Blue...
  • Page 36: Error Codes

    E R R O R C O D E S Error Codes subject to change without notice. ERROR CODES DESCRIPTION Temp Error These messages will appear if there is a temperature and/or 0-10V Error voltage malfunction.
  • Page 37: Specifications

    S P E C I F I C A T I O N S SOURCE 230W 5-in-1 RGBWL (Red, Blue, Green, White, Lime) LED Engine 50,000 Hour Average LED Life* *Test lab conditions. May vary depending on several factors including but not limited to: Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.
  • Page 38: Dimensional Drawings

    DIMENSIONAL DRAWINGS – Pendant Bracket Attached (Not to Scale) Specifications and improvements in the design of this unit and this manual are subject to change without notice.
  • Page 39 DIMENSIONAL DRAWINGS – Yoke Bracket Attached (Not to Scale) Specifications and improvements in the design of this unit and this manual are subject to change without notice.
  • Page 40 DIMENSIONAL DRAWINGS – Recessed Ceiling Kit Attached (Not to Scale) Specifications and improvements in the design of this unit and this manual are subject to change without notice.
  • Page 41 DIMENSIONAL DRAWINGS – Half Snoot Attached (Not to Scale) Specifications and improvements in the design of this unit and this manual are subject to change without notice.
  • Page 42 DIMENSIONAL DRAWINGS – Full Snoot Attached (Not to Scale) Specifications and improvements in the design of this unit and this manual are subject to change without notice.
  • Page 43: Optional Accessories | Fcc Statement

    Fuze Pendant Lens 50° FPL40 1237000243 Fuze Pendant Lens 40° FPL25 1237000229 Fuze Pendant Lens 25° FPCMK 1237000244 Fuze Pendant Ceiling Mount Kit FPYMK 1237000245 Fuze Pendant Yoke Mount Kit FPHS 1237000246 Fuze Pendant Half Snoot FPFS 1237000247 Fuze Pendant Full Snoot F C C S T A T E M E N T This device complies with Part 15 of the FCC Rules.
  • Page 44 USA# FUZ260 1237000225 UPC# 810008260869 ITF-14# 10810008260866...

Table of Contents