Elation FUZ035 User Manual page 12

I N S TA L L AT I O N G U I D E L I N E S
OMEGA BRACKET INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise, and
make sure each fastener is completely locked. Install brackets as illustrated below.
CLAMP INSTALLATION
When mounting fixture to truss, secure an appropriately rated professional grade rigging
clamp to the included Omega Brackets or Single Clamp Bracket Kit. Insert an M10 screw
through the center hole of the Omega Brackets or through the center hole of the Single
Clamp Bracket Kit. The fixture provides a built-in rigging point for a SAFETY CABLE. Be sure
to only use the designated rigging point for the safety cable and never secure a safety cable
to a carrying handle.
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL
NOT FALL IF THE CLAMP FAILS. ONLY USE DESIGNATED RIGGING POINTS
FOR SAFETY CABLE, AND NEVER ATTACH A SAFELY CABLE TO A CARRY-
ING HANDLE.
12
SAFETY CABLE
ATTACHMENT