Webasto ProCore Edge 9 Installation, Operation And Maintenance Manual page 32

ProCore Edge North America IOMM
5.1.1. Connect the battery communication wires – the "CAN bus
for battery BMS," "battery monitor," and "pilot (interlock)" – to the
screw terminal per Table 1 and tighten the terminal screws with a
torque of 5.31 in-lbs (0.6 Nm) (Figure 21).
Figure 21 Battery Communication Wires
Connected to the Screw Terminal
31241-03-0202 Webasto Charging Systems, Inc.
32 of 68