Webasto ProCore Edge 9 Installation, Operation And Maintenance Manual page 12

ProCore Edge North America IOMM
4.1.2. Side-to-Side Charger Spacing with Dividers
Place metal panels between chargers for closer spacing (Figure 3).
The minimum charger-to-divider spacing, for standard installations,
is 4 in. (10 cm). The divider dimensions should be, at a minimum,
24" H × 20" W and 30" H × 20" W (609.6 mm H × 508 mm W and
762 mm H × 508 mm W) for 3- and 5-bay cabinets, respectively.
  
4 in
(10 cm)
Figure 3 Side-to-Side Charger Spacing with Dividers
4.1.3 Offset (45-degree–Angle) Charger Installation
Chargers may be installed also at an offset 45-degree angle for
higher density installations (Figure 4).
Figure 4 Offset 45-Degree Angle Charger Installation
31241-03-0202 Webasto Charging Systems, Inc.
12 of 68