Webasto ProCore Edge 9 Installation, Operation And Maintenance Manual page 30

ProCore Edge North America
4.7.2.2. The positive cable connects to the bus bar stud on the
right, and the negative cable connects to the bus bar stud on the
left, with a torque of 216.83 in-lbs. (24.5 Nm).
Fasten the provided lower clamp to the DC output power cables,
with a torque of 53.1 in-lbs (6 Nm), to secure them for strain relief.
(Figure 19)
NOTE
Ensure, prior to fastening the lower clamp, that the gray protective
rubber sleeve (Figure 19) is on the upper side of the DC output
power cables.
31241-03-0202 Webasto Charging Systems, Inc.
30 of 68
IOMM