Checking Exciter Oil Level - Wacker Neuson DPU 25 Series Operator's Manual

11.2.7

Checking exciter oil level

Item
1. Place the machine upright on a flat surface.
2. Switch off the engine.
3. Let machine cool off.
4. Remove any dirt around the filler hole.
WARNING
Hot exciter oil can spill, causing scalding injuries.


5. Open filler hole.
6. Check: Oil level must reach the start of the thread of the filler hole.
7. If necessary, fill exciter oil through the filler hole.
8. Close filler hole and use a torque wrench to tighten it to 100 Nm.
100_0202_mt_0005.fm
Designation
1 Filler hole
2 Start of thread
Do not open the screw plug on the exiter while the exciter oil is hot.
Let machine cool off.
11 Maintenance
37