Table of Contents
Advertisement
Screw securing the lower guide
12. Remove the lower plate.
Disconnect cables backside of printer mechanism unit, remove 6 screws of lower plate.
13. Slide the DV rollerr assembly direction of arrow, then remove it.
14. Replace assembled parts on the DV roller.
Installation
1. Assembly by reverse order the removal.
Note Lubrication is necessary to right and left shaft of Platen roll.
(Refer to lubrication tables)
NOTE ） after installation, the following adjustment are required.
(1)LF belt tension Note Lubrication is necessary to right and left shaft of Platen roll.
(Refer to lubrication tables)
[For the rear side]
Figure 4.80 DV Roller ASY replacement
Screw securing the lower
Figure 4.81 DV Roller ASY replacement
Lower guide
99
DV roller ASY
(
Front side
)
Advertisement
Table of Contents
