Inlet Asy Replacement - Fujitsu ULTIMA90 Maintenance Manual

AC switch assembly
White wire

(19) Inlet ASY replacement

Removal
1. Remove the upper cover.
2. Remove the printer mechanism assembly.
3. Remove the two screws securing the inlet and one screw securing the frame ground wire, and 4. remove the
inlet assembly.
Installation
1. Install the inlet assembly by reversing the removal procedure.
2. Regarding the connecting cables, refer to the front page.
Inlet ASY
Left side of Inlet AYS
Red wire
Figure 4.37 AC Switch ASY replacement
Red(upper side)
White(lower side)
Rear side of Inlet AYS
Upper side of Inlet AYS
62