Table of Contents
Advertisement
FRONT VIEWING FACE INSTALLATION (SINGLE SIDED)
NOTE: Framing may be constructed of combustible material (i.e. 2 x 4/2 x 6) and does not require steel studs.
NOTE: The appliance must be installed on a flat, solid, continuous surface (e.g. wood, metal, concrete).which must be the full width and depth
of appliance.
This may be the floor, or raised up on a platform to enhance its visual impact.
Note: Measurement (B) does not include height of platform base if raised off the ground.
Example 1/2"(13 mm) thick platform base = 23-3/4" (603 mm) framing height.
SKOPE
110-2
135-2
150-2
195-2
22
FRAMING/FINISHING INSTRUCTIONS
B
A
A
45-1/16"
(1145 mm)
54-15/16"
(1395 mm)
60-13/16"
(1545 mm)
78-9/16"
(1995 mm)
C
B
(minimum
dimension)
(inches/mm)
23-1/4"
10-7/16"
(590 mm)
(265 mm)
23-1/4"
10-7/16"
(590 mm)
(265 mm)
23-1/4"
10-7/16"
(590 mm)
(265 mm)
23-1/4"
10-7/16"
(590 mm)
(265 mm)
C
Advertisement
Table of Contents
