Installation - Regency Fireplace Products Skope E110-2 Instructions For Use Installation And Servicing

Led electric fire range with thermostatic remote control
Hide thumbs Also See for Skope E110-2:
Table of Contents

Advertisement

Owner's Information
GENERAL
TOOLS REQUIRED
A Screwdriver, Level, Saw and Drill will be needed.
UNPACKING THE FIREPLACE
WARNING! DO NOT use this appliance if any part has been
exposed to water.
Immediately call a qualified service technician to inspect and to
replace any part of the electrical system if necessary.
Open the packaging carefully and remove the polystyrene.
Remove and discard the plastic bag.
Keep plastic wrapping away from children.
Be responsible when handling the packing materials.
Check all parts and accessories are removed before disposing of
any packaging.
If necessary keep the original packaging for future transport and/
or storage.
Test the appliance before installation.
WARNING! KEEP ALL COMBUSTIBLE MATERIALS AT LEAST
1M/3.3 FEET FROM THE FRONT OF THE ELECTRIC
FIREPLACE.
LOCATION OF SERIAL DECAL
Location of the serial decal

INSTALLATION

110-2
135-2
150-2
195-2
SERIAL DECALS
Note: For illustration purposes
only. May not be exactly as shown.
11
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Skope e135-2Skope e150-2Skope e195-2

Table of Contents