Table of Contents
Advertisement
Section 3 - Configuration
In the Features tab on the left side of the page, click Quick VPN. This page will help you configure the Quick VPN feature of
your router. Before proceeding, ensure that your Internet connection is working properly. We recommend configuring Dy-
namic DNS before proceeding with Quick VPN setup. If your router is assigned with an IP address from your ISP using DHCP,
it may frequently change, requiring clients credentials to be set up again. A DDNS address can avoid this hassle.
To configure the User settings and grant users with Virtual Private Network (VPN) permission, go to Management > User.
Refer to User on page 90. Click Save at any time to save the changes you have made on this page.
L2TP over IPSec:
Enable or disable the Quick VPN server.
Username:
Enter a username between 1 and 20 characters.
Password:
Enter a password between 1 and 20 characters.
PSK:
Enter a passkey between 6 and 64 characters.
VPN Profile for iOS
Click export to save the VPN profile settings file for iOS devices
Device and MAC OS X:
or Mac OS X.
Authentication
Choose an authentication protocol type: MSCHAPv2, PAP, or
Protocol:
CHAP. MSCHAPv2 is the default.
MPPE:
Select encryption cipher strength: None, RC4-40, or RC4-128.
None is the default.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Advanced Settings...
Quick VPN
82
Advertisement
Table of Contents
