Table of Contents
Advertisement
Section 3 - Configuration
Under Connected Clients, you will see device cards representing each
connected client. Click All to see all connected devices and Heavy
Consumer to see clients that are particularly active on the Internet.
To assign a priority level to a device, enable the AI Traffic Optimizer first.
Then click on the client to open its information page. The following
information will be shown:
Device Name:
The name that describes the client device.
MAC Address:
The MAC address of the client device.
IPv4/IPv6
The IP address in IPv4 and IPv6 addressing mechanism of the client
Address:
device.
Priority:
Select the priority and duration for the client device in the
following categories:
Normal/High: Always Enable, 1 Day, 4 Hours, 2 Hours, or 1 Hour.
Low: Always Enable, 1 Day, 4 Hours, 2 Hours, or 1 Hour.
Traffic Statistics
The follwing traffic statistics is displayed: TCP flow, UDP flow, Download
and Upload speeds (In Mbps).
Real-Time & Weekly Traffic
The Real-time Traffic and Weekly Traffic present real-time speed
measurements in MB/s or KB/s. If no devices are explicitly assigned with
any priority, they will all be treated with equal priority.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
QoS Engine
70
Advertisement
Table of Contents
