Table of Contents
Advertisement
Section 3 - Configuration
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Enabling this feature will present additional configuration options.
Assignment:
Enable Automatic
Enable or disable Automatic DHCP-PD in LAN for other IPv6 routers
DHCP-PD in LAN:
to be connected to the LAN interface. This option is only available if
Enable Automatic DHCP-PD in LAN is enabled.
Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Autoconfiguration
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
Type:
DHCPv6.
If you select SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Enter the router advertisement lifetime (in minutes).
Advertisement
Lifetime:
If you select Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
Range (Start):
IPv6 Address
Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
Range (End):
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
IPv6 - PPPoE (Continued)
49
Advertisement
Table of Contents
