Hardware Setup - D-Link M30 User Manual

Section 2 - Installation
Step 1
Position M30 close to your Internet-connected modem. Turn off and unplug
the power to your cable or DSL broadband modem. This is required. In some
cases, you may need to turn it off for up to five minutes. Connect an Ethernet
cable to the modem and to the Internet port of M30. Next, connect the
power adapter and plug M30 into a power outlet.
Step 2
Wait for M30 to boot up. When the router's LED light starts breathing orange,
wirelessly connect your computer to the Wi-Fi name (SSID) printed on the
device label.
Step 3
Type http://xxxx.devicesetup.net/ into a web browser and follow the
on-screen instructions to complete the setup.
(xxxx represents the last 4 characters of the MAC address)
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual

Hardware Setup

Wi-Fi
Wi-Fi
SSID:
Password:
Wi-Fi
http://xxxx.devicesetup.net/
MODEM
11