Table of Contents
Advertisement
Section 3 - Configuration
Select Auto Configuration (SLAAC/DHCPv6) if your ISP assigns your IPv6 address when your router requests one from the
ISP's server. Some ISPs require you to adjust these settings before your router can connect to the IPv6 Internet. Click Save
when you are done.
DNS Type:
Select either Obtain DNS server address automatically or Use
the following DNS address.
Primary DNS Server:
If you select Use the following DNS address, enter the
primary DNS server address
Secondary DNS
If you select Use the following DNS address, enter the
Server:
secondary DNS server address.
Enable DHCP-PD:
Enable or disable prefix delegation services.
LAN IPv6 Link-Local
Displays the router's LAN link-local address.
Address:
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address:
Enter a valid LAN IPv6 address.
LAN IPv6 Link-Local
Displays the router's LAN link-local address.
Address:
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
IPv6 - Auto Configuration (SLAAC/DHCPv6)
IPv6 DNS Settings
LAN IPv6 Address Settings
45
Advertisement
Table of Contents
