Static Routes - Ipv4 - D-Link M30 User Manual

Section 3 - Configuration
The Static Routes section allows you to define custom routes to control how
traffic moves around your network.
In the Features tab on the left side of the page, click Static Routes. To
configure IPv6 routes, click IPv6 and refer to Static Routes - IPv6 on page
79. To return to the main IPv4 static routes page, click IPv4.
To remove a rule, click on the trash can icon in the Delete column. To edit a
rule, click on the pencil icon in the Edit column. To create a new route, click the
Add Route button. Click Save when you are done. If you edit or create a route,
the following options will appear:
Name:
Enter a name for the route.
Destination
Enter the destination IP address of this route.
Network:
Mask:
Enter the subnet mask of the route.
Gateway:
Enter your next hop gateway to be taken if this route is in use.
Metric:
The route metric is a value from 1 to 16 that indicates the cost of
using this route. A value of 1 represents the lowest cost and 16 the
highest cost.
Interface:
Select an interface that the IP packet must use to transit out of the
router when this route is in use.
Click Apply when you are done.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual

Static Routes - IPv4

78