Quick Vpn - D-Link COVR-1900 User Manual

Section 3 - Configuration
In the Features menu on the bar at the top of the page, click Quick VPN. This page will help you configure the Quick VPN
feature of your router. For more information, refer to Quick VPN on page 104. Before proceeding, ensure that your Internet
connection is working properly. We recommend configuring Dynamic DNS before proceeding with Quick VPN setup. If your
router is assigned an IP address from your ISP using DHCP, it may frequently change, requiring clients credentials to be set
up again and a simple DDNS address will be easier than an IP address.
To configure the User settings and create, manage, and delete user accounts with user-defined access to certain router
services, click the User link. Refer to User on page 86
Click Save at any time to save the changes you have made on this page.
Enable or disable the Quick VPN server.
L2TP over IPSec
Enter a username between 1 and 20 characters.
Username
Enter a password between 1 and 20 characters.
Password
Enter a passkey between 6 and 64 characters.
PSK
Click export to save the VPN profile settings file for iOS devices
VPN Profile for iOS
or Mac OS X.
Device and MAC OS X
Choose the authentication protocol type: MSCHAPv2, PAP,
Authentication
or CHAP. MSCHAPv2 is the default.
Protocol
Select the encryption cipher strength: None, RC4-40, or RC4-
MPPE
128. RC4-128 is the default.
D-Link COVR-1900 User Manual

Quick VPN

Advanced Settings...
81