Table of Contents
Advertisement
Section 3 - Configuration
This page allows you to change the administrator (Admin) password and enable the HTTPS server. In the Management tab on
the left side of the page, click System Admin. Click Save at any time to save the changes you have made on this page.
Password:
Enter a new password for the administrator account. You will need to enter
this password whenever you configure the router using a web browser.
Advanced Settings - Administration
Enable HTTPS
Check to enable HTTPS to connect to the router securely.
Server:
Enable Remote
Enable Remote Management over the Internet using encrypted HTTP
Management:
connection.
Remote Admin
Displays the port number used in the URL to access the web configuration
Port:
page. The default is 8081.
Note: If you enabled Use HTTPS and wish to access the router remotely and
securely, you must enter https:// at the beginning of the address.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
System Admin
Admin Password
Admin
87
Advertisement
Table of Contents
