Quick Vpn - D-Link DIR-1960 User Manual

Section 4 - Configuration
This page will help you configure the Quick VPN feature of your router. For
more information refer to Quick VPN on page 88. Before proceeding, ensure
that your Internet connection is working properly. We recommend configuring
Dynamic DNS before proceeding with Quick VPN setup. If your router is
assigned an IP address from your ISP using DHCP, it may frequently change,
requiring clients credentials to be set up again and a simple DDNS address will
be easier than an IP address.
In the Features menu on the bar on the top of the page, click Quick VPN.
Configure the following options:
L2TP over IPsec: Enable or disable the Quick VPN server.
If Quick VPN is enabled, the following options are available:
Username: Enter a username between 1 and 20 characters.
Password
Enter a username between 1 and 20 characters.
PSK
Enter a passkey between 6 and 64 characters.
D-Link DIR-1960 User Manual

Quick VPN

72