D-Link DI-624 Quick Installation Manual

2.4ghz wireless router
Hide thumbs Also See for D-LINK DI-624:


This product can be set
up using any current web
browser, i.e., Internet Explorer
6 or Netscape Navigator 7

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your modem for confi guring
the DI-624 Multimode Wireless Router. The DI-624 acts as a DHCP server and will
assign all the necessary IP address information on your network. See Appendix at
the end of this Quick Installation Guide or the Manual on the
CD-ROM for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

If any of the above items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DI-624 Air Plus Xtreme G 2.4GHz

Wireless Router

CD-ROM (containing Manual and Warranty)
Ethernet (Straight Through) Cable
7.5V 1A DC Power Adapter
specifi cations subject to change without notice.
Air Plus Xtreme G
2.4GHz Wireless Router
Using a power supply
with a different volt-
age rating will damage and
void the warranty of this


Table of Contents

Summary of Contents for D-Link D-LINK DI-624

  • Page 1: Before You Begin

    Check Your Package Contents If any of the above items are missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and DI-624 Air Plus Xtreme G 2.4GHz...
  • Page 2: Your Network

    Connecting The DI-624 Wireless Router To Your Network First, connect the power adapter to the receptor at the back panel of the DI-624 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. 1.
  • Page 3: Restart Your Computer

    Restart Your Computer Connecting Additional Computers To The DI-624 Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-624 Status LED – a blinking light indicates that the DI-624 is functioning properly.
  • Page 4: Using The Setup Wizard

    Using The Setup Wizard Open your Web browser and type “” URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank. Click Once you have logged in, the Home screen will appear.
  • Page 5 The Setup Wizard (continued) You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next Choose your time zone from the drop down list. Click Next...
  • Page 6 The Setup Wizard (continued) A this point, the setup wizard will try to auto-detect your Internet connec- tion type. If you have a Dynamic or PPPoE connection, you will be brought to the corresponding page. Otherwise, you will see the following screen: Select your Internet Connection.
  • Page 7 The Setup Wizard (continued) If your ISP requires a Static IP Address, and this option is selected, then this screen will appear: Enter the IP address information originally provided to you by your ISP. You will need to complete all the required fields.
  • Page 8: Wireless Setup

    The Setup Wizard (continued) Wireless Setup The default wireless settings for your 802.11g wireless network are: SSID = default Channel = 6 You can change these settings to match an existing wireless network. Click Next If you wish to use encryption for your 802.11g network, the DI-624 is capable of two levels of wireless encryption - 64-bit and 128-bit.
  • Page 9: Test Internet Connection

    Your Setup is Complete! Click Restart Click Close Test Internet Connection You will be returned to the Home tab. Click to Exit Then relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management...
  • Page 10 Microsoft Windows XP: right click on My Network Places select Properties > Right click on the Network Connection associated with the Ethernet adapter and select Properties (i.e., D-Link DFE-530TX+). Click Internet Protocol (TCP/IP) Click Properties Select Obtain an IP address...
  • Page 11 Apple Macintosh OS X: Go to the Apple Menu Click on Preferences and Select Select Built-in Ethernet in the Show pull down menu Select Using DHCP the Configure pull down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear System...
  • Page 12: Technical Support

    You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.

This manual is also suitable for:

Airplus xtreme g di-624

Table of Contents