Wireless Tab - Setting Of Wireless Connection; Http Port Number - Sony IPELA SNC-RZ50N User Manual

Note
The domain suffix is sent to the DHCP server as FQDN
(Fully Qualified Domain Suffix) information when Host
name is set.

HTTP port number

Normally select 80. If you want to use a port number
other than 80, select the text box and type a port number
between 1024 and 65535.
Note
When you have set the HTTP port number to a number
other than 80 in the Network menu or in the IP Setup
Program, access the camera again by typing the IP
address of the camera on your Web browser as follows:
Example: when the HTTP port number is set to 8000
OK/Cancel
See "Buttons common to every menu" on page 31.
Wireless Tab — Setting of wireless
connection
Insert the specified wireless card into the CF card slot or
PC card slot of the camera, and set the items for
connecting to the wireless network.
Before setting, read the operation manual and
installation manual supplied with the wireless card
together with this guide.
When you use the CF card slot, insert the optional Sony
wireless card SNCA-CFW1 or SNCA-CFW5* in it.
When you use the PC card slot, use with the Compact
Flash Type II-PCMCIA converting adaptor which is
commercially available.
Verified wireless cards
• Optional Sony Wireless Card SNCA-CFW1 and
SNCA-CFW5*
• A commercially available CompactFlash type II-
PCMCIA adapter
* SNCA-CFW5 is not available in some countries and
areas. For details, contact your authorized Sony
dealer.
Notes
• Before removing the wireless card from the camera,
turn off the power of the camera.
• The throughput of the data transmission/reception via
the network cable may decrease when the wireless
card is in use.
• If two wireless cards are inserted, the second card is
invalid. Also, if the camera is turned on with two cards
inserted, only the wireless card inserted in the CF card
slot is valid.
MAC address
Displays the MAC address of the wireless card inserted
to the CF card slot or PC card slot.
If a wireless card is not inserted, "00:00:00:00:00:00" is
displayed.
IP address
Configure the IP address for a wireless network.
Obtain an IP address automatically (DHCP): Select
this option when a DHCP server is installed on the
network to allow IP address assignment. With this
setting, the IP address is assigned automatically.
Use the following IP address: Select this option when
you set a fixed IP address. With this setting, specify
the IP address, Subnet mask and Default gateway
manually.
Note
When you select Obtain an IP address automatically
(DHCP), make sure that a DHCP server is operating on
the network.
Configuring the Network — Network Menu
45