Wireless Tab - Setting Of Wireless Connection - Sony IPELA SNC-CS50N User Manual

Subnet mask
Type the subnet mask.
Default gateway
Type the default gateway.
DNS server
Configure the DNS server address.
Obtain DNS server address automatically: Select this
option to obtain the IP address of DNS server
automatically. It can be set only when Obtain an IP
address automatically (DHCP) is selected in the
Network tab.
Use the following DNS server address: Select this
when you set a fixed address as the IP address of the
DNS server. With this setting, specify the addresses
on Primary DNS server and Secondary DNS
server manually.
Note
When you select Obtain DNS server address
automatically, make sure that a DHCP server is
operating on the network.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server, if
necessary.
Host name
Type the host name of the camera to be transmitted to the
DHCP server. This setting is valid only when Obtain an
IP address automatically (DHCP) is selected in the
Network tab.
Domain suffix
Type the domain suffix of the camera to be transmitted
to the DHCP server. This setting is valid only when
Obtain an IP address automatically (DHCP) is
selected in the Network tab.
Note
The domain suffix is sent to the DHCP server as FQDN
(Fully Qualified Domain Suffix) information when Host
name is set.
HTTP port number
Normally select 80. If you want to use a port number
other than 80, select the text box and type a port number
between 1024 and 65535.
Note
When you have set the HTTP port number to a number
other than 80 in the Network menu or in the IP Setup
Program, access the camera again by typing the IP
address of the camera on your Web browser as follows:
Example: when the HTTP port number is set to 8000
OK/Cancel
See "Buttons common to every menu" on page 27.
—
Wireless Tab Setting of wireless
connection
Insert the specified wireless card into the PC card slot of
the camera, and set the items for connecting to the
wireless network.
Before setting, read the operation manual and
installation manual supplied with the wireless card
together with this guide.
Verified wireless cards
• Optional Sony Wireless Card SNCA-CFW1 and
*
SNCA-CFW5
• A commercially available CompactFlash type II-
PCMCIA adapter
* SNCA-CFW5 is not available in some countries and
areas. For details, contact your authorized Sony
dealer.
Notes
• Before removing the wireless card from the camera,
turn off the power of the camera.
• The throughput of the data transmission/reception via
the network cable may decrease when the wireless
card is in use.
Configuring the Network — Network Menu
39