Sony IPELA SNC-RZ50N User Manual page 56

fact that the key pair in the client certificate is not
encrypted.
– When Use a key pair from a CA is selected and
the key pair is not included in the client certificate.
– When Use the camera's built-in key pair is
selected and the client certificate issued
corresponding to Export certificate request is not
imported in the camera.
Note
When the client certificate to be imported is of
PKCS#12 format and the private key password is not set
correctly, "<Put correct private key password>" is
displayed in the boxes of Issuer DN, Subject DN,
Validity Period and Extended Key Usage. Specify the
correct private key password to confirm the information
of the certificate.
To delete the client certificate
Click Delete, and the client certificate stored in the
camera will be deleted.
Private key password
Type the password for the private key information
included in the client certificate using up to 50
characters. This text box is active only when TLS mode
is set to Use a key pair from a CA.
Leave the text box blank if the private key information
included in the client certificate is not encrypted.
If no private key password is set in the camera, the text
box is active to allow entering of a password.
If a private key password is already set, it is displayed
with turned letters.
Reset
To change the private key password, click this button.
The current password is cleared and the password text
box is active to allow a new password entry.
Note
Click at the bottom of the menu if you want
to cancel changing the private key password after
clicking Reset. Doing so restores the other setting items
in the Client certificate tab to the previous settings.
Export certificate request
Exports the certificate request according to the key pair
built in the camera.
To export, enter the items required for the certificate
request and click Export.
Exporting is possible when TLS mode is set to Use the
camera's built-in key pair.
56
Using the 802.1X Authentication Function — 802.1X Menu
Note
If you click Export when all the setting items in Export
certificate request are blank, the certificate request is
exported with "localhost" specified in Common name.
Country name: Select the country name from the drop-
down list.
State or Province name: Type the state or province
name using up to 128 alphanumeric characters and
symbols.
Locality name: Type the locality name using up to 128
alphanumeric characters and symbols.
Organization name: Type the organization name using
up to 64 alphanumeric characters and symbols.
Organization unit name: Type the organization unit
name using up to 64 alphanumeric characters and
symbols.
Common name: Type the organization name using up
to 64 alphanumeric characters and symbols.
Email address: Type the e-mail address using up to 64
alphanumeric characters and symbols.
Notes
• / (slash), = (equal sign) and , (comma) cannot be used
as symbols.
• The total number of characters in State or Province
name, Locality name, Organization name,
Organization unit name, Common name and Email
address should be as follows:
When Country name is selected: 218 characters or
less
When Country name is not selected: 220 characters
or less
OK/Cancel
See "Buttons common to every menu" on page 31.