Monitor Image - Sony IPELA SNC-RZ50N User Manual

You can control pan, tilt, zoom, and focus of the camera.
(page 26)
Pan/Tilt control
Click the arrow button of the direction in which you
want to move the camera. Keep it pressed to move the
camera continuously.
To return to the home position, click
You can select the operation mode of the 8-direction
arrow buttons for panning and tilting in PTZ mode of
the System menu.
Zoom control
Press to zoom out, and press
Zooming continues while the button remains pressed.
Focus control
To focus on a nearby object, press
distant object, press
By pressing , the focus is set to the
optimum position.
Note
To control the focus manually, set Focus mode of the
Camera menu to Manual. (page 38)
Trigger
(Displayed only when the camera Viewer mode
(page 61) is set to Full and one or more triggers are
enabled in the Trigger menu (page 78).)
Select the function you want to use from the drop-down
list and click . The selected function is activated.
The selectable functions are as follows:
– send the still images attached to an e-mail (page 28)
– send the still images to an FTP server (page 28)
– record the still image files in the built-in memory,
ATA memory card (not supplied) or CF memory card
(not supplied) (page 28)
– control the alarm output (page 29)
– switch the Day/Night function on/off (page 29)
– play the audio file stored in the camera (page 29)
Transmission (TCP/UDP
transmission mode)
(Displayed only when the camera image is in MPEG4 or
H.264 and the ActiveX viewer is used.)
Each click switches the transmission mode of the video/
audio data between TCP mode, UDP (Unicast) mode,
and UDP (Multicast) mode. (page 30)
.
to zoom in.
. To focus on a
.
The last selected mode is saved in the computer, and will
stay selected for the next startup.
Notes
• When the SSL function is used, the transmission
function cannot be used.
• The model on sale in China does not support the SSL
function.
Volume
(Displayed when Microphone (page 36) is set to On.)
Drag the bar to adjust the volume.
When you click , the icon changes to
audio output stops. To output the audio, click
Note
If does not appear when the Java applet
viewer is used, Audio codec may not be set to G.711 (64
kbps) (page 36), or Java may not be installed correctly.
To check if Java is installed correctly, refer to "Java
applet viewer" of "About viewers" on page 20.

Monitor image

The image shot by the camera is shown here. The date
and time is displayed at the top of the window.
and the
again.
23
Configuration of Main Viewer