Creating And Transmitting A Panorama Image; Saving A Custom Image To The Camera - Sony IPELA SNC-RZ50N User Manual

Camera port No.: Type the port number of the camera
to be connected.
When you use a proxy server for camera connection,
check the Use proxy check box and set the following
items.
Proxy server address: Type the IP address or host name
of the proxy server.
Proxy server port No.: Type the port number of the
proxy server.
Preparations for connecting to the camera are now
completed.
Main tab
Viewer
The created panorama image is displayed in the upper
viewer.
Angle setting
Specify the camera movement area on the panorama
image.
Drag the mouse to draw a rectangle within which the
camera movement is limited. You can enlarge, reduce or
move the created rectangle. To erase the rectangle, right-
click the mouse.
Notes
• The home position of the factory setting is set to the
center of the viewer. When you set the camera
movement area without changing the factory-set home
position, the center position of the set camera
movement area is set as the camera home position.
• The edges of the panorama image may not be
displayed correctly when the camera is zoomed in.
104
Using the SNC panorama creator — Creating a Panorama Image
Make
Starts shooting to create a panorama image (a complete
360-degree panorama image). It takes about two
minutes to create a complete panorama image.
Note
The exposure and white balance settings are fixed while
a panorama image is being created. To create a clear
panorama image, set Exposure mode to Full auto and
White balance to Auto in the Camera menu and point
the camera to the main subject before starting shooting.
File open
Allows use of a Bitmap or JPEG image file in spite of a
panorama image.
Note
The size of the image in the file should be 320 × 90
pixels (horizontal/vertical). Other image sizes are not
supported.
Send
Transmits a panorama image converted into a JPEG file
to the camera.
Creating and transmitting a
panorama image
1
Click Make on the Main tab to start shooting.
A panorama image will be created in about two
minutes.
Note
Do not perform settings of the camera or move the
camera during shooting.
2
Specify the camera movement area by dragging the
mouse to draw a rectangle on the panorama image.
The specified camera movement area will be
effective when the panorama image is saved in the
camera.
3
Click Send to transmit the panorama image to the
camera.
The panorama image is saved in the camera.
You can use the saved panorama image when you
control panning and tilting from the main viewer.
Saving a custom image to the
camera
You can save a custom image to the camera in spite of
the panorama image shot by the camera.