Private Key Password - Sony IPELA SNC-RZ50N User Manual

Status
Shows if the status of the certificate is valid or invalid.
There are the following statuses.
Valid: The certificate is correctly stored and set.
Invalid: The certificate is not correctly stored and set.
Possible causes of Invalid are the following:
–When Use an external certificate is selected and
the private key password included in the certificate
is not specified correctly.
–When Use an external certificate is selected and
the private key password is specified in spite of the
fact that the key pair in the certificate is not
encrypted.
–When Use an external certificate is selected and
the key pair is not included in the certificate.
–When Use the CSR issued from the camera is
selected and the certificate issued corresponding to
Export certificate request is not imported in the
camera.
Note
When the certificate to be imported is of PKCS#12
format and the private key password is not set correctly,
<Put correct private key password> is displayed in the
boxes of Issuer DN, Subject DN, Validity Period and
Extended Key Usage. Specify the correct private key
password to confirm the information of the certificate.
To delete the certificate
Click Delete, and the certificate stored in the camera
will be deleted.

Private key password

Type the password for the private key information
included in the certificate using up to 50 characters. This
text box is active only when Certificate options is set to
Use an external certificate.
Leave the text box blank if the private key information
included in the certificate is not encrypted.
If no private key password is set in the camera, an active
text field is displayed and this allows a password to be
entered.
If a private key password is already set, it is displayed as
an inactive text field.
Reset
To change the private key password, click this button.
The current password is cleared and the password text
box becomes active to allow a new password entry.
Note
Click at the bottom of the menu if you want
to cancel changing the private key password after
clicking Reset. Doing so restores the other setting items
in the Client certificate tab to the previous settings.
Export certificate request
Exports the certificate request according to the key pair
built in the camera.
To export, enter the items required for the certificate
request and click Export.
Exporting is possible when Certificate options is set to
Use the CRS issued from the camera.
Note
If you click Export when all the setting items in Export
certificate request are blank, you can export the
certificate request with "localhost" specified in
Common name.
Country name: Select the country name from the drop-
down list.
State or Province name: Type the state or province
name using up to 128 alphanumeric characters and
symbols.
Locality name: Type the locality name using up to 128
alphanumeric characters and symbols.
Organization name: Type the organization name using
up to 64 alphanumeric characters and symbols.
Organization unit name: Type the organization unit
name using up to 64 alphanumeric characters and
symbols.
Common name: Type the organization name using up
to 64 alphanumeric characters and symbols.
Email address: Type the e-mail address using up to 64
alphanumeric characters and symbols.
Notes
• / (slash), = (equal sign) and , (comma) cannot be used
as symbols.
• The total number of characters in State or Province
name, Locality name, Organization name,
Organization unit name, Common name and Email
address should be as follows:
When Country name is selected: 218 characters or
less
When Country name is not selected: 220 characters
or less
OK/Cancel
See "Buttons common to every menu" on page 31.
Note
When you click OK after changing SSL setting, close
once the main viewer and the setting window.
Configuring the Network — Network Menu
51