Using The Snc Video Player - Sony IPELA SNC-RZ50N User Manual

Using the SNC video player

1
Start the SNC video player.
2
Click the (browse) icon.
The Select File dialog opens.
3
Select the file you want to play.
Information boxes on the selected file are displayed
on the left side of the window as follows:
Each click on the
between "display" and "Not to display" of the file
information.
File information
Model name: Model name of the camera with
which the file is recorded.
IP address: IP address of the camera with which
the file is recorded.
Serial number: Serial number of the camera with
which the file is recorded.
Record event: Type of event used for the
recording: Sensor input, Moving object
detection or Unattended object detection.
Date&time: Recording date and time
Movie: Video Codec
Audio: Audio Codec
Playing a video/audio file
Click (start) to start playing from the beginning of
the selected file.
To freeze the movie temporarily, click
Click again to restart playing from the frozen point.
To stop playing, click
To restart playing from the beginning, click
again.
Play stops when the file is played to the end.
102
Using the SNC video player — Playing Video/Audio File Recorded with Camera
(information) icon switches
(pause).
(stop).
(start)
Playing from a specified point
Move the slide bar below the image display, and
playback will start from the position of the slide bar.
Adjusting the sound
Adjust the playing sound volume by moving the
slide bar. Move it to the left end for the
minimum volume, and to the right end for the maximum
volume.
Click (speaker) to enable/disable the sound
muting.
When sound muting is on, no sound is heard even if you
move the slide bar.
Saving an image
Click (capture) icon during playing or pause and the
captured image is displayed in a pop-up dialog. To save
the image, click Save on the dialog. You can specify the
destination to which the image is to be stored and select
the JPEG or Bitmap format.