Ftp Client; Alarm Output - Sony IPELA SNC-RZ50N User Manual

FTP client

Checking this box allows you to select FTP from the
trigger drop-down list in the main viewer.
By selecting FTP and clicking
moment you click is captured, and the image file is sent
to the FTP server.
When you click FTP client, the Trigger-FTP client
menu is displayed. You can set the necessary options
here. The setting options and setting procedures are the
same as those of the FTP client menu (page 68).
Image memory
Checking this box allows you to select Image memory
from the trigger drop-down list in the main viewer.
, a still image of the
from the trigger drop-down list in the main viewer.
By selecting Image memory and clicking
image of the moment you click is captured, and the
image file is recorded in the built-in memory, ATA
memory card (not supplied) or CF memory caard (not
supplied).
For the verified cards, contact your authorized Sony
dealer.
When you click Image memory, the Trigger-Image
memory menu is displayed. You can set the necessary
options here. The setting options and setting procedures
are the same as those of the Image memory menu
(page 71).

Alarm output 1, 2

Checking this box allows you to select Alarm output 1
or Alarm output 2 from the trigger drop-down list in the
main viewer. You can control the alarm output by
selecting Alarm output 1 or Alarm output 2 and
clicking .
Select the alarm ouput control mode from Toggle or
Timer.
Toggle: Each time you click
Off (open) is switched.
Timer: When you click
switched to On (short circuit), and will automatically
switched to Off (open) after the time specified in
Duration has elapsed.
Duration
When Timer is selected, specify the time for which the
alarm output remains short circuited, from 1 to 300
seconds.
Setting the Operations from the Viewer — Trigger Menu
, a still
, On (short circuit) or
, the alarm output is
79