Streaming Tab; Audio Port Number; Multicast Streaming; Multicast Address - Sony IPELA SNC-RZ50N User Manual

SNC-RZ50P
JPEG
VGA/384 × 288 12 fps
VGA/384 × 288 16 fps
VGA/384 × 288 8 fps
VGA/384 × 288 12 fps
QVGA 25 fps
• The object detection function does not operate when
H.264 is selected.
• When H.264 is selected, you cannot select Use alarm
buffer in the Alarm sending tab of the FTP client
menu and in the Alarm recording tab of the Image
memory menu.
OK/Cancel
See "Buttons common to every menu" on page 31.

Streaming Tab

Use this tab to set the items for the transmission by
unicast or multicast.
Unicast streaming
Specify the transmission port numbers of the MPEG4/
H.264 video data and audio data to be used when UDP
(Unicast) is selected with
Video port number
Specify the transmission port number of the MPEG4/
H.264 video data. It is initially set to 50000. Specify an
even number from 1024 to 65534. Two port numbers
(the number specified here and an odd number with 1
added to the specified number) are actually used for
video data communication and control.
MPEG4
VGA/384 × 288 12 fps
VGA/384 × 288 8 fps
QVGA 25 fps
QVGA 16 fps
QVGA 25 fps
in the main viewer.

Audio port number

Specify the transmission port number of the audio data.
It is initially set to 50002. Specify an even number from
1024 to 65534. Two port numbers (the number specified
here and an odd number with 1 added to the specified
number) are actually used for audio data communication
and control.
Note
Specify different numbers for the video port number and
the audio port number.

Multicast streaming

Set whether the camera uses multicast streaming for
MPEG4/H.264 video data and audio data or not. It
reduces the transmission load on the camera by making
the computer of the same segment network receive the
same transmitting data.
Select On to allow and Off not to allow multicast
sending.
When you select On, set Multicast address, Video port
number and Audio port number properly.

Multicast address

Type the multicast address used on the Multicast
streaming.
Video port number
Specify transmission port number of the MPEG4/H.264
video data used for the Multicast streaming. It is
initially set to 60000. Specify an even number from
1024 to 65534. Two port numbers (the number specified
here and an odd number with 1 added to the specified
number) are actually used for video data communication
and control.
Audio port number
Specify the audio transmission port number used for the
Multicast streaming. It is initially set to 60002. Specify
an even number from 1024 to 65534. Two port numbers
(the number specified here and an odd number with 1
added to the specified number) are actually used for
audio data communication and control.
Note
Specify different numbers for the video port number and
the audio port number.
OK/Cancel
See "Buttons common to every menu" on page 31.
Setting the Camera Image and Audio — Camera Menu
43