Ssl Tab - Setting The Ssl Function; Proxy Server Name; Proxy Port Number - Sony IPELA SNC-RZ50N User Manual

path: Type the command.
parameter: Type the command parameter if necessary.
You can use the special tags mentioned below for the
parameters.

Proxy server name

When you send HTTP requests via a proxy server, type
the name or IP address of the proxy server, using up to
64 characters.

Proxy port number

Specify the port number when you send HTTP requests
via the proxy server. Set a port number between 1024
and 65535.
Method
Select the HTTP method GET or POST.
OK/Cancel
See "Buttons common to every menu" on page 31.
About the special tags
You can use the following five special tags to allow
notification of the settings acquired by DHCP, such as an
IP address. Type the tags in the parameter section of the
URL that you described in the Message field of the
HTTP.
<IP>
Use this tag to embed the IP address acquired by DHCP
in the text or parameter.
<HTTPPORT>
Use this tag to embed the specified HTTP server port
number in the text or parameters.
<MACADDRESS>
Use this tag to embed the MAC address of the interface
whose IP address was acquired by DHCP, in the text or
parameter.
<MODELNAME>
Use this tag to embed the camera's model name in the
text or parameter.
<SERIAL>
Use this tag to embed the camera's serial number in the
text or parameter.
SSL Tab — Setting the SSL function
You can make settings about the SSL function. The
settings make SSL communication possible between
client equipment and the camera.
Note
The model on sale in China does not support the SSL
function.
SSL function
On: Select this to use the SSL function. When Allow
HTTP connection for some clients is selected. Both
HTTP and SSL connections are allowed. When
Allow HTTP connection for some clients is not
selected, only SSL connection is allowed.
When Microsoft Internet Explorer Ver.6.0 is used
When SSL session is established,
status bar on your web browser.
When Microsoft Internet Explorer Ver.7.0 is used
When SSL session is more or less established,
appears in the right of the address bar on your web
browser.
Off: Select this not to use the SSL function. Only HTTP
connection is allowed with the camera.
Configuring the Network — Network Menu
appears in the
49