Using The Snc Panorama Creator - Creating A Panorama Image; Installing The Snc Panorama Creator; Using The Snc Panorama Creator - Sony IPELA SNC-RZ50N User Manual

Using the SNC
panorama creator
— Creating a Panorama Image
The supplied SNC panorama creator allows you to
create a panorama image to be displayed on the main
viewer.
Using the panorama image, you can move the camera to
the desired position simply by clicking on the image.
This section explains the setup and operations of the
SNC panorama creator.
Note
The SNC panorama creator does not support SSL
connection. When the SSL function (page 49) is set to
On and HTTP connection for some clients is not
selected, the SNC panorama creator can not be used.
To use the SNC panorama creator, set the SSL function
to On and select the HTTP connection for some
clients, or set the SSL function to Off. (The model on
sale in China does not support the SSL function.)
Installing the SNC panorama
creator
1
Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your Web
browser.
If it does not appear automatically in the Web
browser, double-click on the index.htm file on the
CD-ROM.
When you are using Windows Vista, pop-up
"AutoPlay" may appear. For details, "Installing
software" in "When using Windows Vista" on
page 12.
2
Click the Setup icon of SNC panorama creator.
The "File Download" dialog opens.
When you are using Windows XP Service Pack 2 or
Windows Vista, a message regarding the active
contents may appear. For details, see "Installing
software" in "When using Windows XP Service
Pack 2" on page 10 or "Installing software" in
"When using Windows Vista" on page 12.
3
Click Open.
Note
If you click "Save this program to disk" on the "File
Download" dialog, you cannot install the creator
correctly. Delete the downloaded file, and click the
Setup icon again.
4
Install the SNC panorama creator following the
wizard displayed.
If the Software License Agreement is displayed,
read it carefully and accept the agreement to
continue installation.

Using the SNC panorama creator

The SNC panorama creator consists of the Main tab to
create a panorama image and the Setting tab to prepare
for connection to the camera.
When you start the SNC panorama creator, the Setting
tab is displayed.
Note
Before creating a panorama image, check the setting
position and the E. flip setting of the Common tab in the
Camera menu with the viewer.
Setting tab
Before creating a panorama image, set the following
items in the Setting tab to allow connection to the
camera.
Administrator name: Type the ID of the administrator
of the camera to be connected.
Administrator password: Type the password of the
administrator of the camera to be connected.
Tip
The factory settings of both items are "admin."
Camera address: Type the IP address or host name of
the camera to be connected.
Using the SNC panorama creator — Creating a Panorama Image
103