Radio Operation; Troubleshooting Guide; Specification - Hyundai RA 202 Instruction Manual

RADIO OPERATION

1) Plug the Power Cord (7) into a standard 230 V ~ 50 Hz outlet.
2) Fully extend the FM Antenna (6) for best reception of FM broadcasting.
3) Press the Power ON/OFF Switch (8) to "ON" position, then the unit is on. Press the Power
ON/OFF Switch to "OFF" position, then the unit is off.
4) Select either AM or FM on the band knob (2) by turning it to the right for FM or to the left
for AM.
5) Rotate the Frequency Tuning Knob (1) while watching the frequency display to tune to your
favourite station.
6) When listening to the AM bandwidth rotate the unit horizontally for best reception.
TROUBLE SHOOTING GUIDE
The unit does not operate
• The Power Cord (7) is not properly connected to a power outlet.
Cannot listen to any station.
The FM station you selected will not come in clearly
• Move the antenna until reception improves.
• Make a minor adjustment to the Frequency Tuning Knob (1).

SPECIFICATION

Power Source .............................................................................. 230 V ~ 50 Hz
Power Consumption .................................................................... 8 W
Power Consumption Off mode ....................................................< 0,5 W
Output Power ............................................................................... 0.6 W x 2
Speakers ..................................................................................... 3" Dynamic Type
Radio Frequency Coverage
AM ............................................................................................... 530 – 1600 KHZ
FM ............................................................................................... 88 – 108 MHZ
Unit Dimension ............................................................................ 260 (l) x 125 (w) x 160 (h) mm
Weight (NETTO) .......................................................................... 1.8 kg
EN - 17
EN