CAUTION:RISK OF ELECTRIC SHOCK.DO NOT OPEN!!
To reduce the risk of electric shock:do not remove cover(or back).
No user serviceable parts inside.Refer servicing to qualified service personnel.
BEFORE USE
•
Choose unit installation location carefully.Avoid placing it in direct sunlight or close to a source
of heat.Also avIod Iocations subject to vibrations and excessive dust,cold or moisture,Keep
away from sources that hum,such as transformers or motors.
•
Do not open the cabinet as this might result in damage to the circuitry or electrical shock.If a
foreign object should get into the set,contact your dealer.
•
When removing power plug from the wall outlet always pull directly on the plug,never yank the
cord.
•
Do not attempt to clean the unit with chemical solvents as this might damage the finish.Use a
clean,dry cloth.
•
Keep this manual in a safe place for future reference.
LOCATION OF PARTS
1)
Speaker Window
2)
Band Konb
3)
Tuning Konb
4)
Volume/On/Off Konb
5)
Tube Window not
6)
FMAntenna
7)
Power Cord
RADIO OPERATION
1)
PLUG THE POwER CORD(7) INTO A STANDARD 230V~50Hz OUTLET.
2)
POwER ON/OFF
Keep the power on and rotate the volume and ON/OFF knob(4) clockwise. The light of
electron tube (6) will flicker ceaselessly when you listen to a sound bo , that "bo" means the
unit is on.
ENG - 15
ENG