Alarm Operation; Radio Operation; Alarm Ringing; Aux Input - Hyundai H-1508 Instruction Manual

Instruction manual
• In time setting mode, press MODE button
to return to clock mode.

AUX input

To connect an external audio device (eg.
MP3-player), please use a standard stereo
cable with 3.5 mm to 3.5 mm plugs to connect
the audio line-out of the external device to the
AUX input socket of this unit.
LED display functions
• If the AC/DC adapter is off, you can turn
off the display by setting the DISPLAY OFF
switch to "OFF" position. In this mode you can
switch it on for 10 seconds by pushing any
button or by a loud sound (eg. clapping your
hands).
• The brightness of the display is set to be
half-bright during 22:00PM - 6:59:59AM.

Radio operation

• In clock mode press RADIO button to
switch the radio on.
• To adjust the frequency step by step
press repeatedly TURN+/TURN- buttons.
For automatic search of a station, press and
hold TURN- or TURN+ button; the unit will
look for the next available station and start
its broadcast. Repeat the operation to search
more stations.
• To save a station, press and hold SET
button. Press SET button to switch between
saved stations.You can save up to 20 stations
in the memory.
• Press and ALARM key for 3 seconds
to set sleeping time of radio, then press
TURN+ or TURN- to change the sleeping time
between 10/20/30/40/50/60 minutes. After
setting sleeping time, press ALARM key to exit
settings. When time expires, radio will turn off.
During program saving, if no button is
pressed within several seconds, the unit will
return to normal radio mode.
• To adjust volume, in radio mode press
4
repeatedly VOL+/VOL- buttons.
• To switch off the radio, press MODE button.

Alarm operation

Alarm mode

• In clock mode, press MODE button to
activate the alarm mode.
• In alarm mode press and hold SET button
to set the alarming time. Press repeatedly
SET button to go to setting of parameters in
following sequence: hours => minutes => exit.
When setting, the set digits of time will flash.
Press TURN+ or TURN- buttons to adjust the
time. if no button is pressed within 30 seconds
after a parameter is selected, the unit will
automatically set the alarm.
• If no button is pressed within 30 seconds in
alarm mode, the unit will exit to clock mode.

Alarm ringing

• When setting alarm, press RADIO button,
then the playing radio station will be set as the
alarm (the playing radio frequency is set as the
last played radio frequency),
Ringing will last 15 minutes.
• If the radio station was not set as an alarm
signal, then the unit will beep perionically.
• After setting the alarm, press MODE button
to exit to clock mode.
When setting radio as an alarm signal,
make sure the DISPLAY ON/OFF switch on the
back panel is switched to ON. Otherwise the
alarm will go off in standard beeping mode.
• Press ALARM button and the alarm mode
will be on and an "ALARM" indicator will
appear on the screen.
• When the alarm goes off press any button
(except the SNOOZE button) to stop the alarm.
If SNOOZE button is pressed the "SNOOZE"
indicator will flash on the screen. Snooze time
is 5 minutes (snooze function can be used 2
times in a row).