Radio Operation; Troubleshooting Guide; Specifications - Hyundai RA 410B Instruction Manual

RADIO OPERATION

1) Plug the Power Cord (6) into a standard 230 V ~ 50 HZ outlet.
2) Fully extend the FM Antenna (5) for best reception of FM broadcasting.
3) Rotate the On/Off/Volume Knob (4) clockwise until it clicks turning the unit on.
4) Select either AM or FM on the AM/FM/ Knob by turning it to the right for FM or to the left for
AM.
5) Rotate the Frequency Tuning Knob (3) while watching the frequency display to tune to your
favourite station.
6) When listening to the AM bandwidth rotate the unit horizontally for best reception.
TO turn the radio off
Set the VOLUME (4) to Off.
TROUBLE SHOOTING GUIDE
The unit does not operate
• The Power Cord (6) is not properly connected to a power outlet.
• The unit is not turned on: Rotate the On/Off/VOLUME Knob (4) from the OFF position past
the click to turn on the unit.
Cannot listen to any station.
The FM station you selected will not come in clearly
• Move the antenna until reception improves.
• Make a minor adjustment to the Frequency Tuning Knob (3)

SPECIFICATIONS

Power Source: .................................................................... 230 V ~ 50 Hz
Power Consumption: .......................................................... 5 W
Output Power: ..................................................................... 0.6 W
Speakers: ........................................................................... 3" Dynamic Type
Radio Frequency Coverage
Unit Dimension: .................................................................. 222 (L) x 130 (W) x 130 (H) mm
Net Weight (NETTO): ......................................................... 1.26 Kg
We reserve the right to change technical specifications.
AM 530 - 1600 kHz
FM 88 - 108 MHz
EN - 16