Advertisement
Available languages
Available languages
Fault code is shown as
43. The icon
on LCD display and alarm
beeps continuously.
Fault code is shown as 14,
15, 16, 17, 18 or 19, the
icon
lights on LCD
display, and alarm beeps
continuously.
Other fault codes are
shown on LCD display and
alarm beeps continuously.
Battery backup time is
shorter
than
nominal
value
The icon
and
flash on LCD display
and alarm beeps every
second.
44
UPS is overload too
lights
long and becomes fault.
Then UPS shut down
automatically.
The UPS shut down
automatically because
short circuit occurs on
the UPS output.
A UPS internal fault has
occurred.
Batteries are not fully
charged.
Batteries defect
Fan is locked or not
working. Or the UPS
temperature is too high.
Remove excess loads
from UPS output and
restart it.
Check output wiring
and
if
connected
devices are in short
circuit status.
Contact your dealer
Charge the batteries
for at least 7 hours and
then check capacity.
If
the
problem
persists, consult your
dealer.
Contact your dealer to
replace the battery.
Check fans and notify
dealer.
still
Advertisement
