Appendix 1: Installing The Optional Legs Or Pedestal - Enerzone EB00011 Installation And Operation Manual

Table of Contents

Advertisement

Appendix 1: Installing the Optional Legs or Pedestal

We suggest assembling the leg kit or pedestal before positioning the stove. See the following
installation instructions:
Unscrew the 4 bolts in order to remove the 2 steel
supports. Dispose of the two steel supports. They
are no longer required.
42
PEDESTAL ASSEMBLY
Fix the pedestal base using the 4 bolts and
washers removed in the previous step.
LEGS ASSEMBLY
Fix the 2 leg supports using the 4 bolts and
washers removed in the previous step.
Install the heat shield on top of the support
welded to the inner corner of each leg. To
facilitate the installation, insert one side of
the shield over the shield support then bend
the shield down in order to slide the 2 other
corners above the support on the other side.
Flip the stove back on its legs.
Solution 1.3 Installation and Operation Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Solution 1.3

Table of Contents