Appendix 1: Installing the Legs or Pedestal
The leg or pedestal kit must be assembled to the firebox before positioning the stove. See
installation instructions below:
Solution 1.6 Installation and Operation Manual
1- Remove the firebricks, the ash
dump plug and the loading door
from the stove to avoid breaking
any parts and facilitate handling
in the followings steps.
2- Gently flip the stove on its back.
3- Remove the (2) transport support
bracket
(A)
which
discarded. Keep the (4) bolts (B),
washers (C) and nuts (D) since
they will be required in step 5.
can
be
41