Appendix 1: Installing The Optional Door Overlay - Enerzone Solution 1.6 Installation And Operation Manual

APPENDIX 1: INSTALLING THE OPTIONAL DOOR OVERLAY

In order to complete the assembly of your wood fire, you need to install the door overlay. See
figure below for installation instructions:
Solution 1.6 Installation and Operation Manual
Position the overlay (A) on the door
frame and secure it from the inside of
the door using the 4 included screws (B).
To facilitate the installation, do not
tighten the screws until they are all
installed.
Note: It is not necessary to remove the
glass or any other component to install
the overlay
37